M&B are merchants of doors across WA. We have branches in Perth, Geraldton, Albany, Mandurah, Bunbury and Busselton.
DOORS PERTH and COUNTRY WA
Servicing WA for over fifty years. M&B specialise in house lots of doors and the supply of front entry doors, rear backdoors, and internal doors including flush panel, designer doors and Hilton and Sheridan Doors. M B doors Perth sell to project builders, owner builders, renovators and the general public. M&B supply a large range of standard and custom doors in both solid core, hollow core & joinery doors. Site measure and install available in the Perth metro area.
DOOR INSTALL PERTH METRO ONLY
For supply and install of doors in Perth WA metro area, contact our Bayswater branch on 9473 5100.
Our install service for doors is NOR available outside of the Perth metro area however we may be able to recommend an installer. Please contact one of our branches so we can assist you.
TIPS FOR MEASURING YOUR DOORS
Doors measures are expressed in millimeters as Height x Width x Thickness – eg. 2040x820x40mm
- Height – measure the door height on two sides of one face – use the longest measure as your height.
- Width – measure across the door in three places; top, middle and bottom – use the longest measure as your width
- Thickness – take this measure from anywhere. Door thicknesses are typically 35mm for internal doors and 40mm for entry doors or front doors.
- Check measure the frame – take two measures diagonally across the frame from corner to corner. If both measures are different your frame is out of square and you will need to add a few mm to the overall door size.