Pages

Veneer Board

Particleboard

Particleboard


M&B is a major supplier of Panel and Plywood products to the Perth and regional WA building and construction industry.

Particleboard is made up of three layers of wood particles. The middle layer consists of larger wood chips and the two outer surfaces comprises of finer wood particles. The wood particles are pressed together and bonded with resin creating either a Standard or Moisture Resistant glue line. Once pressed the particleboard is mill sanded resulting with a compact wood panel which can be easily machined ready for use or finishing with factory decretive foils or timber veneers.

Particleboard is a non-structural wood based panel suitable for interior applications including joinery, furniture, built–in furniture, shelves and cupboards where the product will not be subject to high humidity.

Particleboard is available in the following thicknesses:

Thin 9 & 12mm
Medium 16 & 18mm
Thick 25 & 33mm

Website: Visit Laminex Trade Essentials – Particleboard

Particleboard Flooring

Particleboard Flooring


Particleboard flooringParticleboard flooring is used in interior flooring applications in both residential and commercial projects and must be installed as per the requirements of AS1860 (Installation of Particleboard Flooring).
It can be used for a variety of framed building constructions including fitted floor, upper storey and platform construction as it provides major cost savings through its economy and through lighter construction allowing reduced foundation cost. Installation times are reduced since dry trades only are involved.

Particleboard Flooring is capable of withstanding general weathering for up to 3 months through the construction phase and it is recommended where possible to avoid prolonged exposure to the sun and cyclic soaking rain as these conditions may alter the moisture gradient of the flooring and may cause dimensional change. The sheets are tongue and grooved and have a plastic tongue and the edges are coated with a wax edge seal to help minimise moisture up take.

Particleboard Flooring is available in both a Standard (non-termite treated) and Termite Treated options. It is available in a 19mm and 22mm thickness for residential applications and 25mm for commercial applications.

Sheet Dimensions Maximum Joist Spacing’s
3600 x 900 x 19mm .450mm
3600 x 1200 x 19mm .450mm
3600 x 900 x 22mm .600mm
3600 x 1200 x 22mm .600mm
3600 x 600 x 25mm .600mm

Melamine

Melamine


MelamineMelamine is the ideal product for shelving, kitchen and laundry cupboards, bathroom vanities, cupboard doors, wardrobes, domestic and commercial furniture and TV cabinets.

Low Pressure Melamine (LPM) is manufactured by mixing Melamine resins with paper overlays which are pressed on to Particleboard and MDF substrates.  Melamine offers an extensive range of colours, patterns and woodgrain solutions in a variety of finishes.  Melamine is extremely economical when compared to veneered board.

Melamine Display

Website: Visit Formica – Melamine products

MDF

MDF


ParticleBoard-MDFM&B is a major supplier of Panel and Plywood products to the Perth and regional WA building and construction industry.

MDF is made from pine timber which is shredded down into tiny wood fibres. These wood fibres are mixed with resins and then pressed together forming a Medium Density Fibreboard commonly known as MDF. MDF can be manufactured with either a standard or MR Glue line.

MDF is to be used in non-structural applications and should not be exposed to damp conditions or high humidity due to expansion and contraction of the board.

MDF is ideal for interior applications and has excellent machining and routing properties. MDF is commonly used in detailed joinery, lacquered furniture, furniture mouldings, skirtings and architraves, built–in furniture, shelves, wall linings and partitions. MDF is also the perfect substrate or laminating and veneering.

MDF is available in the following thicknesses:

Thin 3.0 / 4.75 / 6 & 9mm
Medium 12 / 16 & 18mm
Thick 25 & 32mm

Website: Visit Laminex Trade Essentials – MDF

Panel

Veneer Board
ParticleBoard-MDF
Particleboard flooring
Melamine
ParticleBoard-MDF
Panel Masonite
imprint-featured

Veneer Board

Particleboard

Particleboard


M&B is a major supplier of Panel and Plywood products to the Perth and regional WA building and construction industry.

Particleboard is made up of three layers of wood particles. The middle layer consists of larger wood chips and the two outer surfaces comprises of finer wood particles. The wood particles are pressed together and bonded with resin creating either a Standard or Moisture Resistant glue line. Once pressed the particleboard is mill sanded resulting with a compact wood panel which can be easily machined ready for use or finishing with factory decretive foils or timber veneers.

Particleboard is a non-structural wood based panel suitable for interior applications including joinery, furniture, built–in furniture, shelves and cupboards where the product will not be subject to high humidity.

Particleboard is available in the following thicknesses:

Thin 9 & 12mm
Medium 16 & 18mm
Thick 25 & 33mm

Website: Visit Laminex Trade Essentials – Particleboard

Particleboard Flooring

Particleboard Flooring


Particleboard flooringParticleboard flooring is used in interior flooring applications in both residential and commercial projects and must be installed as per the requirements of AS1860 (Installation of Particleboard Flooring).
It can be used for a variety of framed building constructions including fitted floor, upper storey and platform construction as it provides major cost savings through its economy and through lighter construction allowing reduced foundation cost. Installation times are reduced since dry trades only are involved.

Particleboard Flooring is capable of withstanding general weathering for up to 3 months through the construction phase and it is recommended where possible to avoid prolonged exposure to the sun and cyclic soaking rain as these conditions may alter the moisture gradient of the flooring and may cause dimensional change. The sheets are tongue and grooved and have a plastic tongue and the edges are coated with a wax edge seal to help minimise moisture up take.

Particleboard Flooring is available in both a Standard (non-termite treated) and Termite Treated options. It is available in a 19mm and 22mm thickness for residential applications and 25mm for commercial applications.

Sheet Dimensions Maximum Joist Spacing’s
3600 x 900 x 19mm .450mm
3600 x 1200 x 19mm .450mm
3600 x 900 x 22mm .600mm
3600 x 1200 x 22mm .600mm
3600 x 600 x 25mm .600mm

Melamine

Melamine


MelamineMelamine is the ideal product for shelving, kitchen and laundry cupboards, bathroom vanities, cupboard doors, wardrobes, domestic and commercial furniture and TV cabinets.

Low Pressure Melamine (LPM) is manufactured by mixing Melamine resins with paper overlays which are pressed on to Particleboard and MDF substrates.  Melamine offers an extensive range of colours, patterns and woodgrain solutions in a variety of finishes.  Melamine is extremely economical when compared to veneered board.

Melamine Display

Website: Visit Formica – Melamine products

MDF

MDF


ParticleBoard-MDFM&B is a major supplier of Panel and Plywood products to the Perth and regional WA building and construction industry.

MDF is made from pine timber which is shredded down into tiny wood fibres. These wood fibres are mixed with resins and then pressed together forming a Medium Density Fibreboard commonly known as MDF. MDF can be manufactured with either a standard or MR Glue line.

MDF is to be used in non-structural applications and should not be exposed to damp conditions or high humidity due to expansion and contraction of the board.

MDF is ideal for interior applications and has excellent machining and routing properties. MDF is commonly used in detailed joinery, lacquered furniture, furniture mouldings, skirtings and architraves, built–in furniture, shelves, wall linings and partitions. MDF is also the perfect substrate or laminating and veneering.

MDF is available in the following thicknesses:

Thin 3.0 / 4.75 / 6 & 9mm
Medium 12 / 16 & 18mm
Thick 25 & 32mm

Website: Visit Laminex Trade Essentials – MDF

Panel

Veneer Board
ParticleBoard-MDF
Particleboard flooring
Melamine
ParticleBoard-MDF
Panel Masonite
imprint-featured

Panel and Ply

Panel and Ply

Panel


endurapanel
Veneer Board
ParticleBoard-MDF
Particleboard flooring
Melamine
ParticleBoard-MDF
Panel Masonite
imprint-featured

Ply


australian-ply
Commercial ply

Downloads

M&B download-center

[avia_codeblock_placeholder uid="10"]

ModWood


[avia_codeblock_placeholder uid="13"]

Elements


[avia_codeblock_placeholder uid="15"]

Ariaply


[avia_codeblock_placeholder uid="16"]

Cowdroy


[avia_codeblock_placeholder uid="17"]

Alfresco


[avia_codeblock_placeholder uid="19"]

M&B Services


[avia_codeblock_placeholder uid="20"]

M&B T&C