,

Pine decking

Pine decking


pine-decking

Features

  • Can be stained to any colour
  • Stands up to fully exposed applications – not recommended for use around pools and spas
  • Termite resistant
  • Size – 90mm x 22mm – random lengths
  • Great value

Fixing & Maintenance

  • Top fixing only using quality decking screws (65mm – 10-12 gauge) – M&B does not recommend nails
  • Requires adequate ventilation, ground clearance and drainage
  • Requires oiling before installation – minimum of two coats
  • Requires continual maintenance and oiling to prevent moisture uptake and damage

,

Batu Decking

Batu Decking


batu decking

Features

  • Rich colour and beautiful textured finish
  • Suitable in exposed areas when well maintained – not suitable for use around pools and spas
  • size – 90mm x 19mm – random lengths

Fixing & Maintenance

  • Requires strict ongoing maintenance and oiling to prevent cracking and splintering – minimum twice per year for exposed areas
  • Must be oiled on all sides prior to installation
  • Top fix only using quality decking screws (65mm – 10-12 gauge) – M&B do not recommend the use of nails
  • Standard lengths not available
  • Requires ventilation, ground clearance and drainage

,

Merbau Decking

Merbau Decking


Merbau Decking

Features

  • Fire retardant timber – prefferred timber in Bush Fire Attack areas
  • Very durable
  • Suitable for exposed areas when properly maintained
  • Low moisture uptake
  • Minimal expansion compared to other timbers
  • Resistant to splintering
  • Highly resistant to termites
  • Suitable for use around pools and spas – beware of tannin bleed in these applications
  • Good colour restoration after oiling
  • Sizes – 90mm x 19mm – random lengths / 140mm x 19mm – random lengths

Fixing & Maintenance

  • Ongoing maintenance and oiling required – especially for exposed decks
  • Must be oiled on all sides prior to installation – minimum two coats
  • Must be oiled at least once per year – twice per year for exposed decks
  • Deck wash should be used prior to oiling to remove tannin bleed – common after the deck becomes wet
  • Requires ventilation, ground clearance and drainage
  • Top fixing required – M&B recommend quality decking screws (65mm – 10-12 gauge)

,

Jarrah Decking

Jarrah Decking


Features

  • Beautiful natural attributes in the timber – gum pockets, vain and surface blemishes, adding texture and character to your deck
  • Hardwood suitable for alfresco and covered areas
  • Sourced from sustainable forests
  • Australian Forestry Standard (AFS) certified products
  • Termite resistant

Fixing & Maintenance

  • Requires regular oiling to maintain look and finish – minimum once per year for covered spaces, and 3-4 times per year if exposed
  • Requires adequate ventilation, ground clearance and drainage
  • Top fixing by quality decking screws (65mm – 10-12 gauge) – M&B do not recommend top fixing with nails
  • Sizes – 135mm x 20mm – random lengths;  86mm x 20mm – random lengths

Useful Links

,

eJarrah Decking – eDeck

  • Jarrah eDeck

M&B introduces our innovative “WATERSHED” decking profile. Manufactured from sustainably harvested PEFC* Jarrah timber, these engineered, finger jointed decking boards are available in two widths – 90mm and 135mm. With set lengths of 2.7m and 5.4m installation time for the DIY enthusiast or Tradesman is reduced thus reducing costs. All boards are Standard & Better grade and an increased thickness to the European standard of 21mm, improves their strength and longevity.

The Watershed profile features a slight convex camber on the decking board face which naturally sheds excess water reducing unsightly pooling and the potential to slip on your deck. This assists stability, minimizes cupping and increases the potential life of the timber. The underside of the decking board has a recess to facilitate airflow between the decking board and joist to minimize trapped moisture and further reduce the risk of timber degredation.

Another key feature is all eDeck boards come pre-oiled with a water based exterior oil. This further saves cost (in terms of time) and guarantees an even coating overall which is necessary for timber to perform at it’s best in an outdoor environment. Additionally the final top coat can have a tint to change the colour depending on customers’ preference.

The adhesive for the join is environmentally friendly (MSDS/LINK) and bonds the timber seamlessly with a neat line as opposed to the conventional 4 screws required when site fixing. Another exceptional benefit of this process is a significant reduction in tension along the length of a solid board which improves stability and reduces movement within your decking board through the change of seasons.

Coating & Treatments

In addition to our eDeck boards being pre-oiled, M&B is also able to offer a coating surface to provide our customers with a choice of various superior quality, factory applied, colour stains/tints. We have included a sample of our most popular colours alongside, however we have many other options available. Please ask in store for details on our extensive range of coatings and timber treatments.

Why use eDeck

  • Manufactured from sustainably sourced Jarrah
  • Set lengths available
  • Up to 5400mm lengths which means less joining
  • Two widths available
  • Pre-oiled, thus reducing installation time and costs
  • Profile allows deck to shed surface water naturally
  • Underside recess facilitates airflow
  • Environmentally friendly adhesive on finger joins

Fixing & Maintenance

  • Requires ongoing maintenance and oiling depending on level of exposure – not recommended for use in exposed areas
  • Requires adequate ventilation, ground clearance (min 300mm) and drainage
  • Top fixing should use quality decking screws (65mm – 10-12 gauge) – M&B does not recommend nails
  • Sizes:
    90mm x 21mm x 2.7/5.4m
    135mm x 21mm x 2.7/5.4m